Home
 About
 Kits
 PICs
 Downloads
 Problems
 Rough Guide
 ClubMad
 Diary
 MadLab Australia
 MadLab Canada
 Links
 Contact
 

How To Use Razzle Dazzler

Press the pushbutton to start the sequence of lights. Press it again to stop the lights.

The brightness of the lights can be adjusted. In daylight you might want the lights to be brighter than you would at night. Note that the brighter the lights are the faster the battery will drain, so don't set the brightness any more than you really need. To vary the brightness hold down the pushbutton for about 2 seconds. The lights will then light up one by one round in a circle. The more lights that are on, the brighter they are. Release the button when the lights are bright enough.


Construction Sheet | Schematic | Source Code | Order Form




     
   

Home | Documents | Source | Schematics | Contact | Order | Credits | Sitemap top of page